Solid Decking(Plastic Co-Extrusion)

With A Shell All Way Around The Board, Ensures Maximum Protection Against The Elements.

High Strength

Anti-Corrosion

Weather Resistant

Slip Resistant

Ash
Beige
Brown
Iron Wood
Light Wood
River Red

Specification

Item: XFD077
Size: 137x23mm

48-72h delivery

Characteristics

Material

40% Polyethylene HD + 60% Wood fibre

Density

1170 kg/m3

Elastic modulus

3100 Mpa

Expansion

0.0389 mm/m/°C

Thermal conductivity

0.2W/mK

Elastic modulus

Delta E = 1,09 < 5

Sizes

22.5 x 138 x 3600 mm

Fasteners

Cobra Hybrid 8-18 stainless steel clip

Extrusion type

coextrusion 360°

Resistant to all stains

BROOKLYN co-extruded boards require very little maintenance. Stains such as grease, wine or ketchup can be cleaned easily using soapy water.

It is recommended to wash your deck using a pressure washer (120 bar maximum) at least once a year to remove any moss, which tends to accumulate in the winter and in parts not exposed to the sun.

Tougher stains may be washed with white spirit without the risk of fading.

Protective layer

A fine layer of polyethylene covering the entire board efficiently protects the composite wood against water and any moisture being picking-up. Expansions recorded are very low, with only 1 mm per linear meter when exposed to a 30° variation temperature.

The board is completely rain-proof, and rain flows off without letting water penetrate the protected composite wood. UV-resistant additives are also added to this thin layer to avoid any fading over time.

Kejie guarantees that, for a 15-year period under normal and correct service conditions, and under installation conditions in compliance with instructions written by Kejie, BROOKLYN boards will not be subject to any defect related to their manufacturing, cracks, splinters, delamination, rotting or structural damage caused by fungi, wood-eating insect or termite attacks.

Kejie guarantees the resistance of BROOKLYN deck boards to stains and fading, subject to compliance with instructions for installation and use in residential applications.

BROOKLYN decking is fully resistant to stains, and its radiance is sustained by a co-extrusion process, which covers the board with a pure polyethylene film to ensure perfect sealing of the coating. Maintenance is easier and is limited to simply rinsing with water.

The high-density polyethylene and wood fibre mixture forming the core of the board also ensures very good resistance to knocks and wear.

Cobra Hybrid 8-18 clip installation

BROOKLYN boards must be installed in accordance with the installation instructions using Cobra Hybrid 8-18 stainless steel clips. A bag of 90 clips fastens about 5 m2of boards.

These new dual-material clips help hold the stainless-steel screws in place during installation. Considerable time is saved during installation. Moreover, the universal stainless-steel screws are self-drilling in softwoods, exotic woods and aluminium joists.

Boards fastened using Cobra Hybrid 8-18 clips can be easily removed without disassembling the entire deck.

Joist gaps (centre-to-centre distance) are at most 40 cm for BROOKLYN boards. Applying a joist barrier on softwood joists to extend their durability is recommended.

BROOKLYN is an environmentally-friendly product. 95% manufactured with raw materials from the recycling industry, decking boards are also entirely recyclable.

High-density polyethylene (HDPE) comes from the recycling of plastic waste (plastic bottles), and the wood fibres come from sawdust from manufacturers such as furniture makers.

Manufacturing BROOKLYN decking boards does not harm tropical forests and is an attractive alternative to exotic woods.

Screw-in finishing boards

A range of screw-in boards, identical to BROOKLYN boards, 22.5 x 138 mm section, but without grooves on the sides, may be used to create sundecks for swimming pools, stairs, floor openings and also a finishing strip around the deck.

Stainless steel 5 x 63 Cobra WPC screws, which resist rust and are offered in the same colour as the boards for more discretion, are used for fastening skirting and finishing boards.

Decking and skirting boards may be fastened with Cobra WPC composite screws of the same colour as the boards, but be careful to drill between 2 cells in order to ensure proper maintenance of the screw.

Deck finishing boards

A range of 10 x 84 mm skirting boards, grooved on one surface and smooth on the other, complete the BROOKLYN board range, making it possible to create deck edges up to a height of about 10 cm.

Finally, using an aluminium angle bar to ensure the peripheral contour of the deck and mask the junction between two grooved boards is always possible.

Leave a sufficient gap to ventilate the underside of the deck in compliance with Building Codes .

Circular Hole Hollow Decking(Plastic Co-Extrusion)

Circular Hole Hollow Decking(Plastic Co-Extrusion)

View More

Solid Decking(TPE)

Solid Decking(TPE)

View More

Also discover

WPC Cladding

WPC Cladding

Explore More

WPC Fencing

WPC Fencing

Explore More

Others